Infinity Porcelain Tile Grout

Hybrid grout for porcelain tiles – ICOM technology

Infinity Porcelain Grout is a hybrid, composite-based, ultra-thin grout, suitable for applications in porcelain tiles, decorative ceramics and tiles in internal areas. It can be applied to leaks from 1 to 4 mm thickness. The super smooth finishing turns cleaning into a quick and easy process. It has anti-mold and anti-fungal additives, and is also completely waterproof. It doesn’t stain and can only be cleaned with water.

Easy cleaning with just water

The porosity-free material inhibits the accumulation of dirt, prevents stains and makes cleaning much faster.

Anti-fungus and anti-mold

Its 100% waterproof composition and additives fight fungi and mold, while also being completely resistant to cleaning chemicals.

Quick and easy to apply

Application, finishing, and cleaning. These 3 steps are enough to have an easy application and an extremely smooth finishing.

Hard Group

For over 35 years, our company has been a national reference in metal and pre-molded construction markets, civil construction, modeling industry, prototyping and tooling. Headquartered in Joinville – Santa Catarina

Request a budget

Benefits

100% WATERPROOF

Extremely smooth finishing

High durability – up to 10 years of Reference Useful Life (VUR)

ANTI-FUNGUS AND ANTI-MOLD

Flexible

Easy cleaning with just water

Does not scratch the porcelain tiles

Quick and easy to apply (2x faster than cement and acrylic grouts and 4x faster than epoxy grouts).

ULTRA THIN – Can be applied to 1mm leaks.

Applications

Bathrooms and Laundries

Marbles and Granites

Rough / non-slip porcelain tiles

New tiles or reconstructions

Natural/matte porcelain tiles

Polished porcelain tiles

Videos
Cases
Commercial Data
Technical Data
How to Use
Downloads

Package

400ml cartridge – provided with nozzle for application

Porcelain tile dimensions	Leak width
Dimensions (W x L)	1 mm	1.5 mm	2 mm	3 mm
300 x 150 cm	45-48 m²	30-32 m²	22-24 m²	15-16 m²
260 x 120 cm	37-40 m²	25-26.5 m²	18.5-20 m²	12.5-13.5 m²
200 x 100 cm	30-32 m²	20-21 m²	15-16 m²	10-11 m²
180 x 90 cm	27.5-29 m²	18-19 m²	13.5-14.5 m²	9-9.5 m²
150 x 100 cm	27-28 m²	18-19 m²	13-14 m²	8-9 m²
120 x 120 cm	27-29 m²	18.5-19.5 m²	13.5-14.5 m²	9-9.5 m²
100 x 100 cm	22-24 m²	15-16 m²	11-12 m²	7-8 m²
90 x 90 cm	20-22 m²	13.5-14.5 m²	10-11 m²	6.5-7.5 m²
80 x 80 cm	18-19 m²	11-12 m²	8-9 m²	5-6 m²
80 x 40 cm	12-13 m²	8-8.5 m²	6-6.5 m²	3.5-4 m²
60 x 60 cm	13-14.5 m²	9-9.5 m²	6.5-7 m²	4.5-5 m²
60 x 30 cm	9-9.5 m²	6-6.5 m²	4.5-5 m²	3-3.5 m²
50 x 50 cm	11.5-12 m²	7.5-8 m²	5.5-6 m²	3.5-4 m²

Colors:

Chemical Base: Hybrid grout with ICOM technology
Worktime: 20 – 40 min.
Curing Time: 6 to 10 hours
Application Temperature (surface): 5°C to 35°C
Liberation for light traffic and contact with water: 10 hours
Liberation for heavy traffic: 24 hours
Storage life: 24 months

	1. Leak must be 2 to 3 mm deep. To do so, in case of reconstruction, remove the old grout with the Hard Grout Extractor.
	2. In case of new flooring, remove excess mortar with the Hard Leak Cleaner.
	3. Afterwards, do not forget to clean the dust with a brush or vacuum cleaner.
	4. For rough floors, apply the Hard Grout Release Agent on both sides of the leak. To prevent the release agent from entering the leak, always do it longitudinally.
	5. Remove the cartridge cap and connect the nozzle. After that, place the cartridge into apply position and cut the nozzle at 45º.
	6. Discard 15 cm of the product.
	7. Then apply grout to the leak evenly.
	8. Immediately afterwards, perform the finishing process in continuous lines, while applying pressure with the Hard Finishing Spatula.
	9. After 8 hours, remove the burrs using the Hard Cleaner Spatula.
	10. And it’s done! Your application is complete.