Accessories for the gas fastening tool
The accessories line for the gas fastener tool Hard GT 90 is composed of a Magnetic Ring, Tapered Washer, Stick-E Washer, Gas Cells and a Chair-type Clip. Use for fastening in steel, concrete, masonry, and drywall.
Quer comprar para CNPJ? Clique no botão abaixo e fale com um de nossos especialistas.
Request a budget
Gas Cells: Yield 1000 attachments + Gas anti-leakage device
Washers and clips: Steel with excellent mechanical strength
Magnetic ring: Greater flexibility in application with accessories
HARD GAS CELL
Material: Liquefied propane-butane gas
Yield: 1.000 fasteners
| DESCRIPTION | APPLICATION | QTY. PER PACKAGE (PIECE) | |
 |
Gas cell | Suitable for the pin fastener tools models HARD GT 90, AG and C3 |
1 |
TAPERED WASHER FOR MASONRY MOORING
Material: Galvanized steel
Recommended Pin: 3,0 x 19 mm and 3,0 x 22 mm
| DESCRIPTION | APPLICATION | QTY. PER PACKAGE (PIECE) | |
 |
Tapered washer 23 mm |
Screens and masonry mooring attachment | 250 |
CHAIR CLIP FOR DRYWALL LINING
Material: Galvanized steel
Recommended Pin: 3,0 x 19 mm and 3,0 x 22 mm
| DESCRIPTION | APPLICATION | QTY. PER PACKAGE (PIECE) | |
 |
Chair clip | Plaster ceiling and drywall installation | 1400 |
STICK-E WASHER
Material: Galvanized steel
Recommended Pin: 2,6 x 19 mm and 3,0 x 19 mm
| DESCRIPTION | APPLICATION | QTY. PER PACKAGE (PIECE) | |
 |
Stick-E Washer 1/2” | Screens and metallic clamps attachment | 500 |
| 6000 | |||
| Stick-E Washer 1” | Screens and metallic clamps attachment | 100 | |
| 5000 | |||
HARD MAGNETIC RING
| DESCRIPTION | APPLICATION | QTY. PER PACKAGE (PIECE) | |
 |
Magnetic Ring | Suitable for the pin fastener tools models HARD GT 90, AG, C3 and C5 | 1 |
CHAIR-TYPE CLIP, STICK-E WASHER and TAPERED WASHER:
GAS CELL:
GAS CELL:
Step 1) Remove the safety seal from the gas cell.
Step 2) After removing the safety seal, the gas cell should be coupled in the tool compartment.
Step 3) Push the safety lock and feed the magazine with the pins (available for a maximum of 40 pins – 4 combs).
Step 4) Couple the battery on the tool housing.
Step 5) Press the tool against the substrate to release the equipment safety lock, and then press the trigger to perform the release.
Learn how Solbras, from small changes, had an increase in the productivity of the installation of plates and mini photovoltaic power plant systems, further increasing the quality of its services. Client: Operating throughout Brazil, Solbras develops and offers the best...
Saiba mais
The production of models, molds and core boxes is part of the daily routine of any foundry. These items can be produced with the most varied materials, the most popular being aluminum. But is this the best raw material for...
Saiba mais
Read this history and see how Petrus Empreiteira used Grout Infinity and Flexpren Waterproofing to complete these stages of a work in São Paulo/SP much faster. Important! Also gaining in quality and reliability of the final result of the application. ...
Saiba mais
Stopping the production line because of a floor repair no longer has to be a problem. Do like Projefer, who used FR 117 Mortar in maintenance and managed to clear the place 600% faster. Keep reading for details! Client: Located...
Saiba mais
Did you know that the production of casting models and negatives can be up to 24 times faster? This is possible if you replace the conventional reproduction system with Resin PC 26 + Hardener G 226. This reduction in service...
Saiba mais
Choosing the sealant for the facade of your venture is essential to ensure the safety and durability of the entire structure. For this reason, when you're deciding, it is important to pay attention to some criteria, in order to avoid...
Saiba maisQuer comprar para CNPJ? Clique no botão abaixo e fale com um de nossos especialistas.
Request a budget
