HBR A36 line is composed by Rods, Nuts & Washers, also known as studs or pullrods, which respectively meet the standards ASTM A36, ASTM A563 Grade A and ASTM F 844 Type A.

Request a budget

Benefits

Bar free from oil and grease, ensuring the adhesive better adherence

Bars with 1 and 3 meters for pullrods

Threaded bars with ideal length for fixing chemical anchor bolts

In compliance with the international standards and norms

Safety warranty for the requesting efforts

Anchorage System Warranty (adhesive + bar)

Applications

Used together with the chemical anchor bolts in anchorage systems

Fixing heavy equipment

Assembling metallic frames (beams and columns) in concrete base

Pullrods for electrical, hydraulic, firefighting systems, gas, air conditioning installations

Flanges junction

Commercial Data
Technical Data
Downloads

Threaded Bars ASTM A36

DIAMETER (INCH)	LENGTH (MM)	THREAD F.P.P¹
3/8	130	16
1/2	165	13
5/8	195	11
3/4	250	10
7/8	250	9
1	300	8
1.1/4	410	7
1/2	1000	13
5/8	1000	11
3/4	1000	10
7/8	1000	9
1	1000	8
1.1/4	1000	7
1/2	3000	13
5/8	3000	11
3/4	3000	10
7/8	3000	9
1	3000	8
1.1/4	3000	7

F.P.P.: Thread Pitch per Inch.

Hex Nut ASTM A563 GRADE A

DIAMETER (INCH)	THREAD F.P.P¹	TIGHTENING WRENCH (INCH)	PACKAGE (PIECE)²
3/8	16	9/16	500
1/2	13	3/4	200
5/8	11	15/16	100
3/4	10	1.1/8	50
7/8	9	1.5/16	40
1	8	1.1/2	25
1.1/4	7	1.7/8	20

F.P.P.: Thread Pitch per Inch.

All dimensions are supplied as unitary.

Narrow Plain Washer Type A

DIAMETER (INCH)	PACKAGE (PIECE)¹
3/8	500
1/2	300
5/8	150
3/4	100
7/8	80
1	50
1.1/4	50

All dimensions are supplied as unitary.

COMPOSITION:

Material: Carbon steel grade 5.8

Tensile Strength: 520 MPA

Yield Strength: 400 MPA

FINISHING	LAYER THICKNESS	RESISTANCE TO CORROSION
		SALT-SPRAY¹	KESTERNICH²
WHITE GALVANIZED	^{5 MICRONS}	^{48 HOURS}	N/A³

Standards ASTM B117, ABNT NBR 8094 and DIN 50021 (Red corrosion)
2) Standard DIN 50018 (allowing 15% of Red corrosion in the bolt head)
3) Non-applicable test