PC 3451 Resin + PH 3952 Hardener
Polyurethane Resin, beige, for Extremely Abrasion Resistant Surfaces
It is a low viscosity, bicomponent polyurea system, which is also used as an overlay for molds for several segments in the industry.
Solicitar orçamento para
Benefits
Excellent cost benefit for aluminum molds
Low viscosity
Manufacturable
Applications
Foundry models
Matrices
Model copies
Negatives
Quick reproductions
Prototypes
Small manufacturing of molded components
Pilot tools and molds for vacuum forming
- Technical Data
- How to Use
- Downloads
- Mass mixing ratio: For every 100 g of resin, 60 g of hardener
- Volume mixing ratio: For every 100 ml of resin, 66 ml of hardener
- Worktime (25ºC, 1000 ml): 20 – 25 min
- Maximum recommended thickness: 10 mm
- Demolding time: 16h
The product must be kept in its original container, hermetically closed and stored in temperatures between 15ºC and 30ºC. If properly stored, the product remains unchanged throughout its shelf life indicated on package. Partially used packages should always be properly sealed and used as soon as possible. Keep it distant from heat sources, sparks and flames.
- As some filler components are prone to decant, make sure to shake the resin well before mixing with the hardener.
- Mix both components completely in the indicated proportion.
- After full curing, the product will show the final properties.
- The process and the material temperature must be between 20 – 25 °C.
Budget for companies
Do you want to buy with your CNPJ? Click the button below and talk to one of our experts.